FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   PreferencesPreferences   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Forum index » Electronix » Repair
oddball cable needed
Post new topic   Reply to topic Page 1 of 1 [3 Posts] View previous topic :: View next topic
Author Message
Ray L. Volts
electronics forum Guru Wannabe


Joined: 03 May 2005
Posts: 239

PostPosted: Tue Jul 04, 2006 9:47 pm    Post subject: oddball cable needed Reply with quote
Googling yielded nothing close. Wouldn't ya know, there's no marking on the
cable. If it was a custom, limited production run, so be it, but perhaps
it's available stock somewhere.

The cable is 3-conductor (each is 22AWG with 26 strands). Strain relief
consists of 3 braided nylon cords (0.5mm diameter each) with each cord
sandwiched between 2 conductors. The conductor/cord bundle has
approximately 25mm (1-inch) turns. For additional strain relief, all the
above is surrounded by a flat, unbraided nylon fiber wrap with 14mm
(half-inch) turns. There is no trace of lubricant. OD of cable is 4mm.
Back to top
Michael Kennedy
electronics forum Guru


Joined: 11 Jun 2005
Posts: 401

PostPosted: Thu Jul 06, 2006 8:52 am    Post subject: Re: oddball cable needed Reply with quote
Can you post a picture on the web?


"Ray L. Volts" <raylvolts@REMOVECAPSgmail.com> wrote in message
news:emBqg.8125$0G2.8071@trnddc07...
Quote:
Googling yielded nothing close. Wouldn't ya know, there's no marking on
the cable. If it was a custom, limited production run, so be it, but
perhaps it's available stock somewhere.

The cable is 3-conductor (each is 22AWG with 26 strands). Strain relief
consists of 3 braided nylon cords (0.5mm diameter each) with each cord
sandwiched between 2 conductors. The conductor/cord bundle has
approximately 25mm (1-inch) turns. For additional strain relief, all the
above is surrounded by a flat, unbraided nylon fiber wrap with 14mm
(half-inch) turns. There is no trace of lubricant. OD of cable is 4mm.
Back to top
Ray L. Volts
electronics forum Guru Wannabe


Joined: 03 May 2005
Posts: 239

PostPosted: Thu Jul 06, 2006 12:59 pm    Post subject: Re: oddball cable needed Reply with quote
"Michael Kennedy" <Mikek400@remthis.comcast.net> wrote in message
news:Ku2dnex6LLCmUjHZnZ2dnUVZ_smdnZ2d@comcast.com...
Quote:
Can you post a picture on the web?

I know it sometimes helps to have a visual, but I've no working digicam atm.
Back to top
Google
Back to top
Display posts from previous:   
Post new topic   Reply to topic Page 1 of 1 [3 Posts] View previous topic :: View next topic
The time now is Wed Jan 07, 2009 12:19 pm | All times are GMT
Forum index » Electronix » Repair
Jump to:  

Similar Topics
Topic Author Forum Replies Last Post
No new posts Cable harness Hi-pot test problem yanjie design 0 Mon Sep 03, 2007 3:51 am
No new posts Pressure Transducer Linear algorithm ... William Hightower design 7 Tue Jul 18, 2006 12:24 pm
No new posts telephone cable wiring mike7411@gmail.com Basics 2 Mon Jul 17, 2006 4:17 pm
No new posts 12V DC to 1.5V DC needed 3T39 Repair 11 Fri Jul 14, 2006 10:02 pm
No new posts KLH 21 Tuning Cap needed Tim Schwartz Repair 1 Fri Jul 14, 2006 7:42 pm

Loans | Bankruptcy | Loan | Advertising | Car Finance
Copyright © 2004-2005 DeniX Solutions SRL
Other DeniX Solutions sites: Unix/Linux blog |  Unix/Linux documentation |  Unix/Linux forums |  Medicine forum |  Science forum


Powered by phpBB © 2001, 2005 phpBB Group

[ Time: 0.2666s ][ Queries: 16 (0.1485s) ][ GZIP on - Debug on ]