FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   PreferencesPreferences   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Forum index » Electronix » cad
Help needed with Techjet, Canon, HP, Heidi Wide-Format-Printer, Plotter
Post new topic   Reply to topic Page 1 of 1 [3 Posts] View previous topic :: View next topic
Author Message
goonmunster
electronics forum beginner


Joined: 19 May 2006
Posts: 1

PostPosted: Fri May 19, 2006 6:38 pm    Post subject: Help needed with Techjet, Canon, HP, Heidi Wide-Format-Printer, Plotter Reply with quote

Please help me with the following problems. I recently received a
TechJet 5336 PS w/ postscript option. I am making the Techjet
available to our local Resident/Community Association to print posters
11x17 - 36x48 which are placed at various locations in the community,
in relation to various events.

I've been experimenting with various drivers and found that the Canon
W3050 - W9000, HP GL/2, HP 750C/PS all work with to some degree with
the Techjet 5336 under win2000 and/or Linux and/or OSX. However, I
noticed that it takes a very long time to print. This appears to be
related to the page-at-a-time mechanism used to print.

Does anyone know of other compatible
Postscript/CAD/Canon/Epson/Techjet/HP/Other drivers that work with the
Techjet 5336 PS that might work with the printer, under linux, win2k,
or winxp.

Does anyone know whether or not other manufacturers used a compatible
print-engine?

Can anyone tell me the difference between the Techjet 5336, 5436, 5636
print engines?

Does anyone know where I can find line-at-a-time drivers that might
work with the Techject 5336? Is there a way to con vine one of the
previously mentioned page-at-a-time drivers to print to the Techjet
5336 one line-at-a-time?

Does anyone know where I can find a relatively new compatible ROM for
the Techjet 5336?

The documentation says that the Techjet 5336 can accept upto 64 MB of
memory. In my experience the documented memory limit may be exceeded,
is that the case for the Techjet 5336?

Any help would be appreciated.

Please and Thank You

The Brockton Initiative
http://brockton./dyndns.org
Back to top
DaveM
electronics forum Guru Wannabe


Joined: 04 May 2005
Posts: 297

PostPosted: Fri May 19, 2006 11:23 pm    Post subject: Re: Help needed with Techjet, Canon, HP, Heidi Wide-Format-Printer, Plotter Reply with quote

"goonmunster" <egon.phillips@sympatico.ca> wrote in message
news:1148063935.680335.140930@g10g2000cwb.googlegroups.com...
Quote:
Please help me with the following problems. I recently received a
TechJet 5336 PS w/ postscript option. I am making the Techjet
available to our local Resident/Community Association to print posters
11x17 - 36x48 which are placed at various locations in the community,
in relation to various events.

I've been experimenting with various drivers and found that the Canon
W3050 - W9000, HP GL/2, HP 750C/PS all work with to some degree with
the Techjet 5336 under win2000 and/or Linux and/or OSX. However, I
noticed that it takes a very long time to print. This appears to be
related to the page-at-a-time mechanism used to print.

Does anyone know of other compatible
Postscript/CAD/Canon/Epson/Techjet/HP/Other drivers that work with the
Techjet 5336 PS that might work with the printer, under linux, win2k,
or winxp.

Does anyone know whether or not other manufacturers used a compatible
print-engine?

Can anyone tell me the difference between the Techjet 5336, 5436, 5636
print engines?

Does anyone know where I can find line-at-a-time drivers that might
work with the Techject 5336? Is there a way to con vine one of the
previously mentioned page-at-a-time drivers to print to the Techjet
5336 one line-at-a-time?

Does anyone know where I can find a relatively new compatible ROM for
the Techjet 5336?

The documentation says that the Techjet 5336 can accept upto 64 MB of
memory. In my experience the documented memory limit may be exceeded,
is that the case for the Techjet 5336?

Any help would be appreciated.

Please and Thank You

The Brockton Initiative
http://brockton./dyndns.org




Download drivers and ROM updates at
http://www.calgraphinc.com/Support/plotterfils.html

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Some days you're the dog, some days the hydrant.
Back to top
Robert Baer
electronics forum Guru


Joined: 25 Mar 2005
Posts: 1159

PostPosted: Mon Jul 10, 2006 2:26 am    Post subject: Re: Help needed with Techjet, Canon, HP, Heidi Wide-Format-Printer, Plotter Reply with quote

DaveM wrote:

Quote:
"goonmunster" <egon.phillips@sympatico.ca> wrote in message
news:1148063935.680335.140930@g10g2000cwb.googlegroups.com...

Please help me with the following problems. I recently received a
TechJet 5336 PS w/ postscript option. I am making the Techjet
available to our local Resident/Community Association to print posters
11x17 - 36x48 which are placed at various locations in the community,
in relation to various events.

I've been experimenting with various drivers and found that the Canon
W3050 - W9000, HP GL/2, HP 750C/PS all work with to some degree with
the Techjet 5336 under win2000 and/or Linux and/or OSX. However, I
noticed that it takes a very long time to print. This appears to be
related to the page-at-a-time mechanism used to print.

Does anyone know of other compatible
Postscript/CAD/Canon/Epson/Techjet/HP/Other drivers that work with the
Techjet 5336 PS that might work with the printer, under linux, win2k,
or winxp.

Does anyone know whether or not other manufacturers used a compatible
print-engine?

Can anyone tell me the difference between the Techjet 5336, 5436, 5636
print engines?

Does anyone know where I can find line-at-a-time drivers that might
work with the Techject 5336? Is there a way to con vine one of the
previously mentioned page-at-a-time drivers to print to the Techjet
5336 one line-at-a-time?

Does anyone know where I can find a relatively new compatible ROM for
the Techjet 5336?

The documentation says that the Techjet 5336 can accept upto 64 MB of
memory. In my experience the documented memory limit may be exceeded,
is that the case for the Techjet 5336?

Any help would be appreciated.

Please and Thank You

The Brockton Initiative
http://brockton./dyndns.org





Download drivers and ROM updates at
http://www.calgraphinc.com/Support/plotterfils.html

And it might be a good idea to check how much memory the printer

really has; more memory can do wonders on speed.
Back to top
Google

Back to top
Display posts from previous:   
Post new topic   Reply to topic Page 1 of 1 [3 Posts] View previous topic :: View next topic
The time now is Tue Jun 27, 2017 7:01 am | All times are GMT
Forum index » Electronix » cad
Jump to:  

Similar Topics
Topic Author Forum Replies Last Post
No new posts Pressure Transducer Linear algorithm needed William Hightower design 7 Tue Jul 18, 2006 12:24 pm
No new posts Compaq A3000 all in one printer ~scan motor stall Richard Repair 2 Sat Jul 15, 2006 4:24 am
No new posts 12V DC to 1.5V DC needed 3T39 Repair 11 Fri Jul 14, 2006 10:02 pm
No new posts KLH 21 Tuning Cap needed Tim Schwartz Repair 1 Fri Jul 14, 2006 7:42 pm
No new posts help needed with tsmc03 technology memed09 cad 4 Wed Jul 12, 2006 1:33 pm

Copyright © 2004-2005 DeniX Solutions SRL
Other DeniX Solutions sites: Unix/Linux blog |  Unix/Linux documentation |  Unix/Linux forums |  Medicine forum |  Science forum  |  Send and track newsletters


Powered by phpBB © 2001, 2005 phpBB Group